|
Command |
SETUP(RS2) |
|
|
|
|
Description |
Setup the protocol for the
RS232 communication |
|
|
|
|
Syntax/Parameters |
setup(RS2){...} |
|
|
|
|
Options |
set="96NC"; //quick set up combination "48, 96, 192, 384, 768, 1150
with parity N, O, E and Command option".
baud=38450; //num = 110 to 6,250,000. Any
value can be set to allow trimming for deviating clocks i.e. 38450
data=6; //num = 5, 6, 7, 8
stop=15; //num = 1, 15, 2 - note 15 is 1.5 bits
parity=N; //first letter of Odd, Even, None, Mark, Space
rxi=Y; //set receive interface as active (Y), a command processing
source (C) or disable (N). Default = N
proc=""; //process on receive termination character. See below
procDel=Y; //remove or keep the termination character(s) before
processing
procNum=5; //interrupt on n bytes received as alternative to proc and
procDel.
rxb=8246; //set size of receive buffer in bytes. Default = 8192 bytes
maximum = 256K bytes.
txi=Y; //set transmit interface as active (Y), to echo command
processing (E) or disable (N)
txb=8350; //set size of transmit buffer in bytes. Default = 8192
bytes
encode=s; //set
s=ASCII, w=UNICODE, m=UTF8 or use sr specifying raw text bytes and sd for raw data.
flow=N; //none (N), hardware RTS/CTS or DTR/DSR (H), software XON
XOFF (S). |
|
|
|
|
Example |
setup(RS2)
{
set="96NC"; //quick set up combination "48, 96, 192, 384, 768, 1150
with parity N, O, E and Command option".
}
setup(RS2)
{
baud=38450; //num = 110 to 6,250,000. Any
value can be set to allow trimming for deviating clocks i.e. 38450
data=6; //num = 5, 6, 7, 8
stop=15; //num = 1, 15, 2 - note 15 is 1.5 bits
parity=N; //first letter of Odd, Even, None, Mark, Space
rxi=Y; //set receive interface as active (Y), a command processing
source (C) or disable (N). Default = N
proc=""; //process on receive termination character. See below
procDel=Y; //remove or keep the termination character(s) before
processing
rxb=8246; //set size of receive buffer in bytes. Default = 8192 bytes
maximum = 256K bytes.
txi=Y; //set transmit interface as active (Y), to echo command
processing (E) or disable (N)
txb=8350; //set size of transmit buffer in bytes. Default = 8192
bytes
encode=s; //set s=ASCII, w=UNICODE, m=UTF8 or use sr specifying raw text bytes and sd
for raw data.
flow=N; //none (N), hardware RTS/CTS or DTR/DSR (H), software XON
XOFF (S).
} |
|
|
|
|
