|
Command |
SETUP(ADC) |
|
|
|
|
Description |
Setup the protocol for the
Analogue to Digital Convertors |
|
|
|
|
Syntax/Parameters |
setup( adc ){...} |
|
|
|
|
Options |
active=num; //set none, ADC1, ADC2 or both
calib1=num; //set value to use for calibration/scaling of ADC1
calib2=num; //set value to use for calibration/scaling of ADC2
avg1=num; //number of samples read and then averaged for ADC1
avg2=num; //number of samples read and then averaged for ADC2 |
|
|
|
|
Example |
setup( adc )
{
active=12; //set none, ADC1, ADC2 or both
calib1=0.4; //set value to use for calibration/scaling of ADC1
calib2=0.2; //set value to use for calibration/scaling of ADC2
avg1=16; //number of samples read and then averaged for ADC1
avg2=16; //number of samples read and then averaged for ADC2
} |
|
|
|
|
